[資訊]Apple update Final Cut Pro X to 10.2, Motion to 5.2 and Compressor to 4.2&Free stock videos – Pexels Videos

1.Apple update Final Cut Pro X to 10.2, Motion to 5.2 and Compressor to 4.2
新增了下列功能與強化
3D Titles
Smart Collections
Draw Mask
Color Correction is now an Effect.
New Scope Display Options
New Import Window
Improved Processing of Waveforms
New XML Version 1.5
Faster RED Workflow
Send to Compressor
More Video Formats Supported
Other Improvements, Features 7 Bug Fixes
http://www.fcp.co/final-cut-pro/news/1642-apple-update-final-cut-pro-x-to-10-2-motion-to-5-2-and-compressor-to-4-2

2.Free stock videos – Pexels Videos
https://videos.pexels.com/

[Docker心得]網卡混亂模式設定篇

首先本次操作是在CentOS7 64bit上,反正早晚都要熟悉新版指令不如提早開始.

Promiscuous是混雜模式，是指對目的硬體位址不加任何檢查，全部接收的工作模式 .

1.之前的ifconfig -a這指令在CentOS7上已經改成下列指令
$ip a
懷舊的朋友可以下:sudo yum -y install net-tools安裝完後即可下達ifconfig,提醒之後的CentOS版也不會有ifconfig的指令了早點習慣新版.
指令下完後看一下docker0這個虛擬的網路介面,注意""內的文字,這裏是標注提醒不會真的顯示在你的畫面上.
3: docker0: <"NO-CARRIER,BROADCAST,MULTICAST,UP"> mtu 1500 qdisc noqueue state DOWN

2.把docker的虛擬網路卡停止
ip link set dev docker0 down






3.再次觀察docker的虛擬網路卡的變化
ip a
3: docker0: <"BROADCAST,MULTICAST"> mtu 1500 qdisc noqueue state DOWN








4.查看自己設備上網卡名稱
vi /etc/sysconfig/network-scripts/ifcfg-<host_network>


5.啟動混亂模式
ip link set eth0 promisc on

6.觀察是否正確啟動
ip a
2:<host_network>: <“BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP”> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:50:56:81:22:12 brd ff:ff:ff:ff:ff:ff

基本上以上完成就能ping到docker0這張虛擬網卡了.
再來的Docker橋接跟固定IP設定就另開一篇來討論了,目前也卡住在固定IP設定.

[Docker心得]在Centos6與Centos7安裝的差異比較

到目前為止,如果使用Centos7安裝Docker記得images使用cnetos6的版本會比較好一點,光卡在systemctl上就能卡很久了,待續.

1.Centos6安裝步驟

1.1首先要安裝上EPEL後才能安裝Docker,所以6以後的版本就不建議玩Docker了.

sudo wget http://download.fedoraproject.org/pub/epel/4/x86_64/epel-release-4-10.noarch.rpm

1.2下載完RPM檔後,就安裝了.

sudo rpm -ivh epel-release-4-10.noarch.rpm

1.3安裝完RPM檔後一定要更新.

sudo yum repolist

Centos6安裝EPEL參考連結 http://www.tecmint.com/how-to-enable-epel-repository-for-rhel-centos-6-5/

1.4接著移除Centos6上的docker(這步必要不管是剛剛裝完OS,或是舊有版本安裝docker).

sudo yum -y remove docker

1.5安裝Docker.

sudo yum install docker-io

1.6啟動Docker服務.

sudo service docker start

1.7設定Docker服務常駐.

sudo chkconfig docker on

Docker官方安裝參考連結 https://docs.docker.com/installation/centos/

2.Centos7安裝步驟

2.1安裝Docker.

sudo yum -y install docker docker-registry

2.2常駐Docker服務.

sudo systemctl enable docker.service

2.3啟動Docker.

sudo systemctl start docker.service

Centos7三步驟就收工,當然記得安裝完後確認一下Docker的版本.

sudo docker version

如果想玩目前最新支援ipv6的1.5版,記得更新.

sudo systemctl stop docker 

sudo wget https://get.docker.com/builds/Linux/x86_64/docker-latest -O /usr/bin/docker

sudo systemctl start docker

[心得]Docker Network Configuration

建立自訂橋接網卡IP
1.停止Docker服務並移除預設 docker0上設定.
sudo systemctl stop docker
sudo ip link set dev docker0 down
sudo brctl delbr docker0
sudo iptables -t nat -F POSTROUTING
2.建立自訂橋接網卡
sudo brctl addbr bridge0
sudo ip addr add 192.168.5.1/24 dev bridge0
sudo ip link set dev bridge0 up
3.確認setp2設定
ip addr show bridge0
**使用Ubuntu當Base OS時下列指令要下:
$ echo 'DOCKER_OPTS="-b=bridge0"' >> /etc/default/docker
sudo systemctl start docker
4.最後確認
sudo iptables -t nat -L -n

Docker官網參考連結:https://docs.docker.com/articles/networking/

3/22晚安曲 楊宗緯-背叛https://www.youtube.com/watch?v=xHZ7leE_mQ8 祝大家明天上班愉快.

Microsoft KB3033889,KB3035131,KB3035132,KB3032359,KB3035527'Successful' Updates error

OS:Windows7&Windows8

sol:http://windowssecrets.com/forums/showthread.php/167476-KB3021952-amp-KB3032359-Repetitive-Successful-Updates

sol:http://note.chiebukuro.yahoo.co.jp/detail/n336422

sol:http://freesoft.tvbok.com/cat97/2015-2016/2015_03_windows_update.html

[心得]初嘗三大虛擬化軟體

目前常用虛擬化三大軟體不外乎Esxi 5.5,XenServer-6.5,Hyper-V Server2012 R2,而他們用戶端連線管理程式分別為:VMware vSphere Client,Citrix XenCenter,Hyper-V管理員.
這次把操作過的簡易心得提出,當然XenServer跟Hyper-V需要更多時間才能上手,所以是拿Esxi跟這兩套相比較.

心得如下:
1.Esxi不愧是虛擬伺服器上的王者,在操作使用跟安裝完後擴充上容易,缺點:網卡要求很高,一般都建議使用Intel的網卡.

2.XenServer的不方便地方在於建立虛擬伺服器時如果選擇iso安裝的話需要先建立一個公用資料夾,再分享iso檔案,接著使用內網傳輸方式安裝,這點對於用慣Esxi的人來說很痛苦阿,好處是不用刪除上傳iso檔,另外建立虛擬伺服器只有CPU,RAM能設定,日後擴充上實在很麻煩.

3.Hyper-V在管理上只能透過Hyper-V管理員,在Windows 7上都需要額外安裝,而且Hyper-V Server2012 R2這個版本只能用Windows 8來管理,採用相同OS核心才能管理,因為很重要所以要說三次,比起上述兩個來說也太麻煩了吧,好處是微軟的遠端桌面真的很好用阿.

以上,後續心得在找時間補上.

CentOS上安裝Laravel 4開發環境

rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm

rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm

sudo yum --enablerepo=remi install httpd -y

sudo service httpd start

sudo yum --enablerepo=remi install php php-mysql -y

yum search php-

sudo yum --enablerepo=remi install php-mcrypt -y

sudo yum --enablerepo=remi install mysql-server -y

sudo service mysqld start

sudo /usr/bin/mysql_secure_installation

sudo chkconfig httpd on

sudo chkconfig mysqld on

curl  -k -sS https://getcomposer.org/installer | php

echo $PATH

sudo mv composer.phar /usr/local/bin/composer

wget https://github.com/laravel/laravel/archive/develop.zip

which unzip

sudo yum install unzip -y

sudo unzip develop

sudo mv laravel-develop /var/www/yoursite

sudo rm  -f develop

cd /var/www/yoursite

composer install

sudo chmod 775 /var/www/yoursite/app/storage

sudo vi /etc/httpd/conf/httpd.conf最後一行加入下列
<VirtualHost *:80>
        ServerName yoursite.com
        DocumentRoot /var/www/yoursite/public

       <Directory /var/www/yoursite/public>
          <IfModule mod_rewrite.c>
          Options -MultiViews
          RewriteEngine On
          RewriteCond %{REQUEST_FILENAME} !-f
         RewriteRule ^ index.php [L]
       </IfModule>
</Directory>
</VirtualHost>

sudo service httpd restart

參考連結:https://www.digitalocean.com/community/tutorials/how-to-install-laravel-4-on-a-centos-6-vps